Connected: An Internet Encyclopedia
9.2.3.3 Jitter

Up: Connected: An Internet Encyclopedia
Up: Requests For Comments
Up: RFC 1771
Up: 9. UPDATE Message Handling
Up: 9.2 Update-Send Process
Up: 9.2.3 Controlling Routing Traffic Overhead
Prev: 9.2.3.2 Frequency of Route Origination
Next: 9.2.4 Efficient Organization of Routing Information

9.2.3.3 Jitter

9.2.3.3 Jitter

To minimize the likelihood that the distribution of BGP messages by a given BGP speaker will contain peaks, jitter should be applied to the timers associated with MinASOriginationInterval, Keepalive, and MinRouteAdvertisementInterval. A given BGP speaker shall apply the same jitter to each of these quantities regardless of the destinations to which the updates are being sent; that is, jitter will not be applied on a "per peer" basis.

The amount of jitter to be introduced shall be determined by multiplying the base value of the appropriate timer by a random factor which is uniformly distributed in the range from 0.75 to 1.0.


Next: 9.2.4 Efficient Organization of Routing Information

Connected: An Internet Encyclopedia
9.2.3.3 Jitter